EQUIPMENT EXPORT LOGISTICS
JCB 508-66 Telehandler Transport – United States to Bouake, Cote d’Ivoire
Select a thumbnail to switch photos. Click the main photo to open the gallery. Use arrow keys to browse and Esc to close.
Cargo & Logistics Specs
| Equipment Model | JCB 508-66 Telehandler |
|---|---|
| Operating Weight | Approx. 28,627 lbs / 12,985 kg — base machine |
| Transport Dimensions (L × W × H) | 22 ft 5 in × 7 ft 10.5 in × 8 ft 10.5 in / 6.82 × 2.40 × 2.70 m — to front carriage, before container preparation |
| Origin / POL | 🇺🇸 United States |
| Port of Discharge / Transit | Abidjan, Cote d'Ivoire |
| Final Destination | 🇨🇮 Bouake, Cote d'Ivoire |
| Freight Method | 40ft High Cube — engineered reduced-envelope loading; Flat Rack / Ro-Ro for intact-machine transport |
| Transit Corridor | U.S. road pickup + ocean freight + destination delivery |
SEAVOLK Operational Scope
- Auction & Yard Pickup: Stepdeck or lowboy allocation; auction release, Gate Pass and terminal receiving appointments.
- Biosecurity & Export Prep: High-pressure cleaning of tires or tracks and undercarriage; leak control, carrier-specified fluid management and manufacturer-approved battery isolation.
- Loading & Disassembly Protocols: Fully retract the boom and stow stabilizers; remove projecting forks or carriage. Approve the reduced-width and reduced-height loading drawing before High Cube loading.
- Lashing & Securing: Grade 70 3/8-inch transport chains with matching binders, approved anchor points and calculated restraint capacity; wheel chocks, load-spreading dunnage and protected hydraulic connections.
- Customs & Documentation: Equipment identification and ownership review; applicable CBP export formalities, commercial invoice, packing list and Bill of Lading; CMR and jurisdiction-specific transit declarations for road legs.
Frequently Asked Questions
How does SEAVOLK route the JCB 508-66 through Georgia?
Poti handling connects with inland transit through Azerbaijan to Baku/Alat. The Trans-Caspian segment reaches Aktau, followed by rail or trucking into Uzbekistan and the receiving-site delivery.
Is custom disassembly required for 40ft High Cube loading?
The intact machine is approximately 2.40 m wide and 2.70 m high; representative High Cube doors provide about 2.34 m width and 2.585 m height. Fork removal alone does not resolve these restrictions. Structural, cab or wheel removal requires manufacturer-approved procedures and engineered supports.
How are export clearance and the U.S. Gate Pass handled?
The release process reconciles the serial number with purchase and ownership documents, nominates the collecting carrier and verifies seller release authority. Export filings and applicable CBP presentation requirements are aligned with the port receiving deadline.